EIT Tools Professional

 

Manual torque multipliers Electric Torque Wrenches Cordless Torque Wrenches Pneumatic Hydraulic Pneumatic Nutrunner, dust shrouds, torque control impact wrenches, digital torque tester

You are here:

Digital Torque Wrenches with Flexible drive had - Digital torque adapters

A new innovative and cost-effective range on industrial quality digital torque wrenches and digital torque adapters for professional
applications. Both EIT digital tools are perfect to drive hand torque multipliers - easy to set, monitor and operate. Consistent and
accurate torque outputs can now be achieved with a high torque repeatability.

Features and benefits Links to other products and information
  • Industrial quality, ergonomic design, non slip rubber grip, sturdy storage case
  • 15˚ flexible angle ratchet head for easy access and safe operation
  • Operates in both clockwise and anticlockwise directions
  • Torque units can be selected as Nm, ft-lbs, in-lbs or kgf-m via menu buttons
  • Torque value and Tolerance value can be entered seperately in the control panel
  • Large, easy to read digital torque display
  • LED warning indicators combined with audio notification
  • When the selected torque is achieved, the green & red light are on and the buzzer beeps intermittently - the LCD shows the max. applied torque for 15 seconds.
  • If the applied torque exceeds the selected values the green & red lights are on and the buzzer beeps continuously - an error signal is shown on the digital display
  • Two models available to cover a practical torque range from 10-135 and 20-200 Nm
Digital torque wrenches EIT
 


EIT Digital Torque Wrenches with Flexible Angle Head

The ideal torque wrench to use in conjunction with manual torque multipliers - see our range here...

Photo Type Square Drive Torque range
Nm / ft-lbs
Torque readout
values
Battery Operating
temp. C
Visual
alarm
Audio
Alarm
Dim.
mm
Weight
kg
EIT-6324 HTC EIT-DFTW
3/8" 10 -135 7.3 - 100 Nm, ft-lbs, cm-kg, kgf-m 6 x AAA 5° - 42° 2 x LED Beep, Buzzer L = 400 1.10
EIT-DFTW
1/2" 20 - 200 14.6 - 146 Nm, ft-lbs, cm-kg, kgf-m 6 x AAA 5° - 42° 2 x LED Beep, Buzzer L = 575 1.80

Sturdy storage box Big LCD control panel 15° Flexible angle head Perfect to drive manual torque mutlipliers
Carry box Control panle Flexible angle head Torque Multiplier

EIT Digital Torque Adapter
Converts any ratchet into a torque wrench. Can also be used as calibration device for your existing torque tools. Very cost-effective and super accurate +/- 2%. Up to 50 torque measurements can be stored and recalled in the integrated memory.

Photo Type Square Drive Torque range
Nm / ft-lbs
Torque readout
values
Battery Operating
temp. C
Visual
alarm
Audio
Alarm
Dim.
mm
Weight
kg
DTA Digital torque adapter EIT-DTA
1/4" 6 - 30 4.4 - 2.2 Nm, ft-lbs, cm-kg, kgf-m 1 x CR2032 -10° - 60° LED Beep, Buzzer L = 75
W = 45
0.183
EIT-DTA
3/8" 27 - 135 20 - 100 Nm, ft-lbs, cm-kg, kgf-m 1 x CR2032 -10° - 60° LED Beep, Buzzer L = 75
W = 45
0.183
EIT-DTA 1/2" 40 - 200 30 - 150 Nm, ft-lbs, cm-kg, kgf-m 1 x CR2032 -10° - 60° LED Beep, Buzzer L = 75
W = 45
0.183

Compact unit, big LCD display, easy to operate Big LCD control panel and sturdy storage box Digital torque multiplier calibrating torque wrench Digital Torque Adapter with ratchet on torque multiplier
Digital Torque Adapater Digital Torque Adapter Digital Torque Adapter DTA Digital Torque Adapter on Torque Multiplier


arrow back to top Tips and Tricks tips and tricks contact us contact us print this page print this page add this site to your favorites add to favorites empty Tips and Tricks links
last updated 18.8.15
 

All design & content © 2001-2015 Emazing International - Australia - ABN 61 149 129 938 - torque tools