EIT Tools Professional

 

Manual torque multipliers Electric Torque Wrenches Cordless Torque Wrenches Pneumatic Hydraulic Pneumatic Nutrunner, dust shrouds, torque control impact wrenches, digital torque tester

You are here:

Pneumatic nutrunner oilfree EIT
EIT Air Angle Wrenches / Pneumatic Nutrunners NON-LUBE - oilfree operation
  • Accurate tightening of bolts from M2 - M7
  • Ideal for applications in confined areas
  • Ergonomic design for optimum, fatigue-free operation
  • Angle head can be rotated by 360° to allow optimum
    access to all areas
  • Precision shut-off clutch
  • Tested according to ISP 5393, ensuring the highest levels of accuracy, durability and repeatability
  • Oil-free NON-LUBE lubrication free motor
  • Industrial top quality design for long service life
  • The standard and high capacity lines of our air angle wrenches incorporates different model series, which vary according to type of clutch, reverse mechanism, and torque capacity.




EIT Air Angle Wrenches / Pneumatic Nutrunners NON-LUBE - oilfree operation - reversible
Picture Type Torque range Nm Free speed
rpm
Length
mm
Side to centre
dist. mm
Angle
head
height
mm
Square
drive
Weight
kg

eit611

 

EIT-472ABSF 1.0 - 7.0 275 180 12 33 3/8" 0.69
EIT-561ABSF 1.2 - 9.0 1000 215 13 33 3/8" 1.3
EIT-611ABSF

3.0 - 12.0

550 215 13 33 3/8" 1.3
EI-730 EIT-730ABSF

5.0 - 40.0

300 346 18 38 3/8" 1.4
oilfree
This reversible lever valve type model is equipped with an automatic, adjustable clutch. The motor shuts off at the preselected torque with a precision of +/- 3%!
The special non-lube oilfree model is fitted with a hardened cylinder bush and patented composite vanes that allow oilfree operation of the tool even in continuous use. Reverse the rotation by sliding the reverse/forward ring in clockwise/counterclockwise direction.
EIT-611ABCF
Easy Torque Adjustment
The torque can be adjusted as follows: Unscrew the torque ring in clockwise direction, move the sleeve towards the angle head housing to expose the internal, hexagonal torque adjusting ring.

EIT-611ABCF

Torque Reference Scale
A scale of 0-10 is shown on the gear housing under the hexagonal torque ring and serves a a reference for the torque selection. 0 equals the lowest torque setting, 10 the highest.


Move the hexagonal torque adjusting ring to the left to increase the torque or to the left to decrease the torque. Once the desired setting is chosen, screw the torque ring sleeve back onto the housing.

EIT-611ABCF
Colour Coding of multiple tools in operation
Choose one of the four different torque colour rings (green, yellow, red, blue) to identify various tools of the same type with the selected torque. Slide the torque colour ring over the housing and place into the torque indicator groove.

EIT Air Pistol Torque Wrenches / Pneumatic Pistol Type Nutrunners NON-LUBE - oilfree operation - reversible - built in silencer

Picture Type Torque range Nm Free speed
rpm
Length
mm
Side to centre
dist. mm
Sound level dBA Square
drive
Weight
kg

EIT-611SDPF

EIT-481 SDPF 1.0 - 6.0 2200 215 19.5 72 3/8" 0.98
EIT-561 SDPF 1.2 - 7.5 1000 215 19.5 72 3/8" 0.98
EIT-611 SDPF 3.0 - 10.0 550 215 19.5 72 3/8" 0.98
EIT-661 SDPF 3.0 - 18.0 300 215 19.5 72 3/8" 1.10
EIT-691 SDPF 5.0 - 28.0 250 215 19.5 72 3/8" 1.25
oilfree
This reversible lever valve type model is equipped with an automatic, adjustable clutch. The motor shuts off at the preselected torque with a precision of +/- 3%!
The special non-lube oilfree model is fitted with a hardened cylinder bush and patented composite vanes that allow oilfree operation of the tool even in continuous use. Reverse the rotation by sliding the reverse/forward ring in clockwise/counterclockwise direction.
Torque Setting

Easy Torque Adjustment
The torque can be adjusted as follows: Unscrew the torque ring in clockwise direction, move the sleeve towards the square drive to expose the internal, hexagonal torque adjusting ring.

Torque Reference Scale
A scale of 0-10 is shown on the gear housing under the hexagonal torque ring and serves a a reference for the torque selection. 0 equals the lowest torque setting, 10 the highest.


Move the hexagonal torque adjusting ring to the left to increase the torque or to the left to decrease the torque. Once the desired setting is chosen, screw the torque ring sleeve back onto the housing.

back to top

 


arrow back to top Tips and Tricks tips and tricks contact us contact us print this page print this page add this site to your favorites add to favorites empty Tips and Tricks links
last updated 18.8.15
 

All design & content © 2001-2015 Emazing International - Australia - ABN 61 149 129 938 - torque tools