 |
|
|
You are here:
|
|
Alkitronic® Compact Pneumatic Radial Torque Wrench Type RCL 36P, RCL
46P, RCL 80P
- specially designed for use at extremely protruding screw
ends found with heat plate exchangers
- the new generation of continuously rotating pneumatic
torque wrenches - with no hammer mechanism
- extremely compact design
- save and easy mode of operation
- secure and precise operation
- easy change of direction - left to right hand operation
- optimum transmission of high torque's
- heavy duty gear box - proved design
- low noise level
- Ideal for operation in hazardous areas
|
|
Alkitronic® - Compact Radial Torque Wrench Type RCL 36P / RCL
46P with 2 speeds.
Optimal application to plate heat exchangers, also in explosive gas
atmospheres and in confined areas. The use of two torque wrenches
(diagonally or crosswise) ensures an optimal speed and accuracy in
assembling large plates. The Alkitronic remote control Type FBL offers
you the perfect solution.
2-speed mechanical gearbox - torque range from 590Nm to 4'535 Nm.
| Photo |
Type / Model
No. |
Torque Nm
* |
Hex drive
mm |
Dim. mm
|
Idle speed
1/min |
Weight
kg |
| 2 Gear |
1 Gear |
H |
B |
X/Y |
2
Gear |
1
Gear |
 |
RCL 36P
|
590 - 1730 |
1440 - 4235 |
36 |
400 |
163 |
56 |
3 |
1 |
12.5 |
| RCL 46 P |
630 - 1850 |
1545 - 4535 |
46 |
435 |
188 |
73 |
3 |
1 |
14.0 |
Bolt distance
in mm:
RCL-36P A1 = 100mm
RCL-46P A1 = 112 mm |
Plate Heat Exchanger
|
Alkitronic® - Compact Radial Torque Wrench Type RCL 80P.
Optimal application for larger plate heat exchangers, also in explosive
gas atmospheres and in confined areas. The use of two torque wrenches
(diagonally or crosswise) ensures an optimal speed and accuracy in
assembling large plates. The Alkitronic remote control Type FBL offers
you the perfect solution.
2-speed mechanical gearbox - torque range from 670 Nm to 4'840 Nm.
| Photo |
Type / Model
No. |
Torque Nm
* |
Hex drive
mm |
Dim. mm
|
Idle speed
1/min |
Weight
kg |
| 2 Gear |
1 Gear |
H |
B |
X/Y |
2
Gear |
1
Gear |
 |
RCL 80 P |
670 - 1975 |
1645 - 4840 |
80 |
450 |
230 |
85 |
6 |
2 |
21.0 |
|
Bolt distance in mm:
A1 = 130mm / A2 = 160mm
|
Application shown on Alfa-Laval Heat Exchanger
|
back to top
Alkitronic® - STA Insert
Hex Adaptors
Simply insert into existing hex drive of machine to
reduce to required bolt size
| Photo |
Type
/
Model-No. |
Hex size
OD mm |
Hex size
ID mm |
To suit
Torque Wrench Type |
 |
STA 80 - 70
|
80 |
70 |
CLS-SG
80
RCL 80 P |
| STA 80 - 65 |
65 |
| STA 80 - 60 |
60 |
| STA 80 - 55 |
55 |
| STA 80 - 50 |
50 |
| STA 80 - 46 |
46 |
back to top
Alkitronic® FBL - Air supply system for a constant and simultaneous
operation of 2 machines
| Photo |
Description |
|
The perfect solution for a constant and simultaneous operation
of 2 RCL Pneumatic Torque Wrenches when used on heat exchangers.
Air supply, air pressure and air lubrication is controlled
by one air maintenance unit, where the air pressure is adjusted
to suit the required operating torque according to the torque
chart supplied with each tool.
|
 |
Air Maintenance unit complete with filter, regulator,
lubricator, 5 m flexible air hose, including air couplings
and fittings, air lubrication oil. Mounted on base plate with
transport handle.
In order to maintain maximum performance and
lifetime of the pneumatic torque wrench the compressed air
needs to be lubricated.
The torque of the pneumatic torque wrench is regulated by
the regulator. An air pressure of 2 - 7 bar with an air volume
of approx. 10-15 litres/second ensures optimal operating conditions.
The torque accuracy depends on the stability
of the air supply!
|
 |
* Example of a torque flow chart stating the
torque values at different levels of air pressure from 2-7
bar. For loosening bolts a reserve of approx. 20 % has to
be added to the max. torque.
|
back to top |
|
| |
|
|
|
|
|
|
|
All design & content © 2001-2012 Emazing International, PO Box 821, Mudgeeraba QLD 4213 - Australia - ABN 61 149 129 938 - torque tools |
|
