 |
|
|
You are here:
|
|
Alkitronic® Tangential Pneumatic Torque
Wrench Type CLS-SG
- Ideal tool for applications on plate heat
exchangers
- Consistent quality and low running costs
- Optimal application to plate heat exchangers
- Suited for work in explosive gas atmospheres
- Perfect for work in confined areas
- The use of pneumatic torque wrenches with
tangential gearing (e.g. 2 - diagonally or crosswise)
ensures an
optimal speed and accuracy in assembling large
plates.
- Optional remote control type FBL offers you
the perfect solution.
|
|
Alkitronic® - CLS-SG Pneumatic Tangential
Torque Wrench
| Photo |
Type
/
Model-No. |
Torque
Nm |
Height overall
mm |
Height
H = mm |
Width
B =mm |
Length
L =mm |
Gear
ratio |
Weight
kg |
|
CLS-SG
65 |
1'280
- 3'780 |
480 |
225 |
270 |
260 |
1
: 3.77 |
16.5 |
CLS-SG 80
|
 |
|
back to top
Alkitronic® - STA Insert
Hex Adaptors
Simply insert into existing hex drive of machine to
reduce to required bolt size
| Photo |
Type
/
Model-No. |
Hex size
OD mm |
Hex size
ID mm |
To suit
Torque Wrench Type |
 |
STA 65 - 55
|
65 |
55 |
CLS-SG
65 |
| STA 65 - 50 |
50 |
| STA 65 - 46 |
46 |
| STA 65 - 41 |
41 |
| STA 65 - 36 |
36 |
STA 80 - 70
|
80 |
70 |
CLS-SG
80
RCL 80 P |
| STA 80 - 65 |
65 |
| STA 80 - 60 |
60 |
| STA 80 - 55 |
55 |
| STA 80 - 50 |
50 |
| STA 80 - 46 |
46 |
back to top
Alkitronic® FBL - Air supply
system for a constant and simultaneous operation of
2 machines
| Photo |
Description |
|
The perfect solution for a constant and simultaneous
operation of 2 RCL Pneumatic Torque Wrenches when
used on heat exchangers.
Air supply, air pressure and air lubrication
is controlled by one air maintenance unit, where
the air pressure is adjusted to suit the required
operating torque according to the torque chart
supplied with each tool.
|
 |
Air Maintenance unit complete with
filter, regulator, lubricator, 5 m flexible air
hose, including air couplings and fittings, air
lubrication oil. Mounted on base plate with transport
handle.
In order to maintain maximum performance
and lifetime of the pneumatic torque wrench the
compressed air needs to be lubricated.
The torque of the pneumatic torque wrench is regulated
by the regulator. An air pressure of 2 - 7 bar
with an air volume of approx. 10-15 litres/second
ensures optimal operating conditions.
The torque accuracy depends on the
stability of the air supply!
|
 |
* Example of a torque flow chart
stating the torque values at different levels
of air pressure from 2-7 bar. For loosening bolts
a reserve of approx. 20 % has to be added to the
max. torque.
|
|
|
|
|
|
|
|
All design & content © 2001-2012 Emazing International, PO Box 821, Mudgeeraba QLD 4213 - Australia - ABN 61 149 129 938 - torque tools |
|
